You want your cabinet looks new but you do not want to buy a new one because you have no budget for it. you can just have an improvement with it. replace only the cabinet doors. You can build your own new cabinets doors. There are styles of cabinet doors you can choose.but, because you build it by yourself, just build the simple one. Therefore, it gonna be easier for you to build. You want to build it, but you do not know how to build cabinet doors.
Here are some steps of how to build cabinet doors. Cut the stiles or the sides of the door same to the height of the rails and door. The top and bottom is the same to the door width. Attach an auxiliary fence to the table saw, and feed a rail face down into the blades. Turn over, add feed rail into blades again. Set table saw dado head at ½ inch. Turn rail on its side, and run into blades. Turn over and repeat the steps. Drill holes at 11/4 inch deep and 5/16 inch in diameter.
Cut grooves in the sides of each settle between the mortises. Do it for inside of the rails edges too. To make a raised pane, set the table saw blade at a 15-degree angle and run against the auxiliary fence on edge. Do it too all four edges. Set 90 degrees blade position, stiles and run over blade on all four edges. Smoothed edges by sanding.
Glue he grooves and mortises on the rails and stiles using wood glue. Set door panel into grooves. Install the rails and stiles with tenons fitting inside the mortises on each pieces surrounding the panel of the door. Hold the clamps till the glue dry. Smooth the door by sanding. Add the handles and hinges in what you want.