The basement is such a good place within the house for you to spend the time relaxing at the weekend and that is why most people tend to do something when finishing the basement. By the time you are done with the finishing of the basement, the final touch is the drop ceiling installation. Also known as a suspending ceiling, a drop ceiling is such a good addition to the house by utilizing a system of tracks and tiles in order to create a ceiling. Installing a drop ceiling is such an easy thing to do, but not so many people know how to install a drop ceiling properly without spending a lot of money in the process. Luckily, I am giving the solutions for you pay serious attention at when installing a drop ceiling. Through this post, we are going to spend more time in order to learn how to install a drop ceiling, guys!
Before starting the project, it is better for you to check your local building codes so you could define the minimum height required for the suspended ceiling. Generally, the ceilings must allow at least 7.5 feet (2.3 m) clearance from the floor in new construction. However, you have to check it anyway since your local code may be different. So, are you ready to start installing a drop ceiling right at this time, guys?
As a start, you need to mark the spot for the brackets followed by mounting the parameter for them. Next, define a total number of tiles needed in order to provide the bridge for the gap simply by dividing the length between the moldings by the width of the tiles in both directions. Then, install the runners as well as cross tees. End things up by installing the ceiling tiles by leaning them faintly and sliding them into place.