If you like having some diy projects in making some furniture pieces, then a sawhorse table can be a very important piece you need to have. Sawhorse table provides a surface that is easily moved and placed wherever it is convenient. The wood can be removed when you are finished and stored whenever it is not used. You can make your own sawhorse table to get your diy projects completed properly.
You need to prepare four pieces of two-by-for to 26 inches long on a circular saw as the legs of the sawhorse. After that, saw off one end of each leg at a 20-degree angle as the feet ends of the legs. On the uncut end of the leg, make a cut at a 70-degree angle as the top of each of the four legs. Lay a leg down to make the top point points to the left, then make a vertical mark 3inches in from the left end with a pencil. Do the same thing to the other legs of the sawhorse table. Place horizontally each leg on the saw table and cut along the vertical pencil marks you have made. Attach two legs along the lengthen each side of a 32-inch two-by-four and each of them should be about 6 inches away from the end of the central two-by-four. On the either end of the central two-by-four, there should be two upside down V shapes hold this centerpiece up in the air. After that, place the top end of the legs against the two-by-four and drill screws with a power drill. Since the first is done, you can make a second sawhorse in the same way. When the sawhorse is finished, cut a piece of plywood as the tabletop in the size you want and stand the sawhorse next to each other. the last, place the plywood on top of the sawhorses and separate them until the wood is held steadily.
Those are some simple steps you can do to make your own sawhorse table for doing certain diy projects you might want to do to decorate your home.