You are going to need some professional guys in order to do the home theater setup for your house. This is reasonably since there is no way you could do this alone who is immature for technologies or electricity. Having these ways to do the following basic setup for your home theater is still acceptable for you to try.
First, you have to get position of your TV in your room. You should point the TV directly towards the couches to give you the best viewing angle and also be mindful of open windows and possible glare in your home theater room.
Second, you should get another position for your speakers as the surround sound system. You know that most system have a 5.1 setup, where three speakers go up front and two go in the back along with the subwoofer on its ground. You have to consult this to those who responsible for your surround system setting for the right location. Third, you can place the surround receiver, Blu-ray player, cable box and any other similar devices which are needed to complete the home theater of your house. These devices need to be close to the TV in order to plug in to it.
Fourth, you should wire the surround sound speakers, which each of individual speaker has a wire that must be fed around the room to the receiver. You should also make sure that you can connect the correct speaker to the way it should be of the receiver.
Fifth, you are going to need to connect the surround sound receiver to the TV in purpose that it will be either is accomplished by a white and red RCA cable, coaxial audio cable, optical cable or HDMI cable. Sixth, you can now connect the Blu-ray player to your TV using an HDMI cable to connect the “Output” slot on the Blu-ray player to an HDMI “input” on your TV.
Connect your Blu-ray player to your TV. Use an HDMI cable to connect the “Output” slot on the Blu-ray player to an HDMI “Input” on your TV. Last, you can now enjoy your home theater by connecting your cable box first to your TV. The HD cable boxes use either red, blue, and green component cables or HDMI cables.